Black Natural Versatile Plastic
Kyosho Maxxum FF Rear Knuckles
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$20.10
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Replacement rear knuckles for the Kyosho Maxxum FF buggy.
These pieces are modelled after the original pieces and should fit exactly the same. You will receive two rear knuckles sprued together. The left and right parts are identical.
Required to mount these parts: Tapping the holes with M3 thread. (Tapping M3 thread is not needed when using original Kyosho self-tapping screws). Also I recommend using a scalpel knife to scrape out the holes where the bearings have to fit to get rid of potential residue powder from the printing process.
These pieces are modelled after the original pieces and should fit exactly the same. You will receive two rear knuckles sprued together. The left and right parts are identical.
Required to mount these parts: Tapping the holes with M3 thread. (Tapping M3 thread is not needed when using original Kyosho self-tapping screws). Also I recommend using a scalpel knife to scrape out the holes where the bearings have to fit to get rid of potential residue powder from the printing process.
Details
What's in the box:
Maxxum FF Rear Knuckle
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
