Basic Nylon Plastic
MPP 2.0 Chassis
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$53.95
Basic Materials Best Value
Shop Owner Recommendations
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Chassis
for "Korbanth MPP 2.0" saber with modified blade socket from 7/8" to 1"
for "Korbanth MPP 2.0" saber with modified blade socket from 7/8" to 1"
Features:
- requires a few custom modifications on the front emitter hilt part under the clamp box (drilling)
- requires a custom modification on the blade socket, must be bored out from default 7/8 inch diameter to 1 inch (but if you want to still have the default 7/8 inch blade socket, then you can just cut off a 1 inch diameter portion from the front chassis section, keep some 1 inch portion to insert in the front hilt part)
- for Pixelblade setup with a SCW NPXL™ V3 connector pcb
- full size removable 21700 Protected Li-Ion battery
- USB-C port support (for SD card Data access, firmware uploads and battery charging)
- TC4056 Li-Ion battery charging module support
- high power Kill Switch support
- BT909 bluetooth module support (we suggest to cut the metal area on top of the bluetooth module location and cover that area with plastic)
- Proffieboard, CFX, Verso, GHv3 sound boards support (each board, except CFX, requires it's special holder)
- OLED display support
- pixel accent strips in the chassis
- 2 functional buttons under the bubble card + 1 button on the hilt emitter
- 31mm bass speaker
For this chassis assembly you also need:
- 1x NPXL V3 pogo pin connector from ShtokCustomWorx (with LONG pins) for Pixelblade/Neopixel setup: NPXL V3 Connector from SaberBay (USA) / NPXL V3 Connector from KRsabers (UK) / NPXL V3 Connector from Guardian Sabers (AU) / ShtokCustomWorx (RU)
- 1x transparent lid (lens) cover for NPXL V3 connector Hilt side pcb for use in 3D-printed chassis: Transparent lid for NPXL V3 connector (USA) / Transparent lid for NPXL V3 connector (UK)
- 8x 2*1mm OD magnets: 2*1mm neodymium magnets
- 1x Positive and x1 Negative Battery contact terminals
- 1x Kill Switch: High Power Kill Switch (USA) / High Power Kill Switch (UK)
- 2x 4mm OD 30mm long brass or aluminum or copper tubes
- 2x 7-8mm wide 64mm long strip of 3535 pixels for side accent leds
- aluminum heat sink for the TC4056 charging module, email me to purchase ($5 USD + shipping): shtokcustomworx@gmail.com
- sound board, 31mm bass speaker, BT909 bluetooth module, USB-C port, TC4056 Li-Ion battery charging module, Protected 21700 high drain 10-20A battery, OLED display
- some 30-32AWG, 24AWG and 22AWG wires
Details
What's in the box:
K_MPP_Chassis
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$16.49
$16.53
$34.65
