Aluminum
C-3PO Slide_One_Piece
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$24.66
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
These are my C-3PO piston designs made to be functional and durable enough for a protocol droid cosplay. They utilize a set screw that slides in the channel of the piston preventing the rod from falling out while still allowing a full range of movement.
These are designed specifically to fit in the Jesse_M C-3PO arms from Thingiverse when printed at 100% scale.
Jesse_M files here:
https://www.thingiverse.com/jesse_m/designs
The pistons are designed for a ¼ inch rod, material of your choice. I used brass rods. The rods are meant to be fastened with a 4:40 set screw inside the piston’s channel and inside the nipple. This is in case the print breaks the rod is not glued in and can be reused. The rod will need to be drilled and threaded.
To complete ONE arm you will need the following files:
Quantity 1 Nipple_Back
Quantity 1 Nipple_Front
Quantity 1 Piston_Back_Channel
Quantity 1 Piston_Front_Channel
Quantity 2 Slide_One_Piece
Sizzle reel of how I made mine and how they function: https://www.instagram.com/p/Cn2akaApheo/
If you print these, message me on Instagram if you like them or if there’s an issue you found. Thanks!
These are designed specifically to fit in the Jesse_M C-3PO arms from Thingiverse when printed at 100% scale.
Jesse_M files here:
https://www.thingiverse.com/jesse_m/designs
The pistons are designed for a ¼ inch rod, material of your choice. I used brass rods. The rods are meant to be fastened with a 4:40 set screw inside the piston’s channel and inside the nipple. This is in case the print breaks the rod is not glued in and can be reused. The rod will need to be drilled and threaded.
To complete ONE arm you will need the following files:
Quantity 1 Nipple_Back
Quantity 1 Nipple_Front
Quantity 1 Piston_Back_Channel
Quantity 1 Piston_Front_Channel
Quantity 2 Slide_One_Piece
Sizzle reel of how I made mine and how they function: https://www.instagram.com/p/Cn2akaApheo/
If you print these, message me on Instagram if you like them or if there’s an issue you found. Thanks!
Details
What's in the box:
Slide_One_Piece
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$11.88
$11.82
$9.50
$9.50
