--------Crystal chamber specification:-------- Crystal chamber is made from three parts, 2x LED holders, and chamber body ** this product complete the Destroyer chassis **
crystal chamber has a built holes for two 5mm LED to light the crystal.
crystal chamber built for a 1.5" long and 0.42" thick crystal.
to hold the crystal chamber with the chassis you will need:
six 2.8mm (0.114") solid brass rods, length will vary (depends on your built).
three will go thru the crystal chamber and thru most of the chassis
three will go thru the crystal chamber and a small part of the chassis. link: solid rods
3mm led holders are available for eight 3mm led's (you will need to buy x4 each holder holds two LED)
* printing in metal can have ± 0.125mm change in size ** Chassis have a small place for resistors, a professional installer is recommended *** some minor modification may be needed (printing can shrink the rods holes by 0.1mm or less)
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: