1/6th Dark Bat Knight BAS Grappling Gun

Accurate Sized/Shape/Detail Grappling Gun for your 1/6th SUPER HERO ANIMATED BAT DARK KNIGHT figure.

Parts will come unpainted, and need a light clean up before painting. Then just simply glue the handle to the front part.

Set Includes 1 Grappling Gun!

Any questions please feel free to ask.

****RECOMMENDED PAINTING TIPS****

- Lightly sand with 600 Grit Sand Paper and finish with 1000 Grit

- Place parts in a cup of Warm to Hot Water(NOT BOILING) with 4-5 drops of mild dish washing detergent. Swoosh around slowly for about 30-45sec to mix detergent and water. Allow parts to sit in cup of water for a few hours to help clean off sanding dust and excess printing materail and any oilly like substance that was applied during the print process.

- Take parts out and Rinse parts with clean warm water to remove soap and allow to dry on paper towel.

- When Dry, I like to use a light primer like Tamiya or Mr. Surfacer 1000 and apply just a few light coats.

- Now that your primer has dried for a few hours use your paint of choice, and follow that up with your choice of finishing clear coat.

****************************************************** 

You do not have to follow these steps, but this is what I do to get the part to look the best.