Tan Fine Detail Plastic
Combiner Wars Drone Roller
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$142.96
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Recently upgraded, Optimus Prime’s reconnaissance drone, Roller, is ready to assist the Autobot leader in the coming Combiner wars!
Roller transforms from reconnaissance drone, to heavy ion blaster, to a chest piece for Optimus Maximus!
Heavy ion Blaster mode has a 5mm handle and can be held by most action figures, or plugged into 5mm ports.
Figure also has three 5mm ports. One in the spoiler, and two either side of the body, behind the wheels.
This figure requires two metal rods to be pushed through the designated areas either side of the main body. These rods are held in place through friction alone. The current holes are 1/16” in diameter, and can easily be expanded by drilling them wider without significantly damaging the figure. It is recommended that the rods be carefully, completely inserted first, and then trimmed down. The rods should be anywhere from 1.5” - 1.7” long. Cut down paperclips work perfectly fine.
TFW2005 Post here:
http://www.tfw2005.com/boards/threads/combiner-wars-roller-3d-print-shapeways.1163132/
Roller transforms from reconnaissance drone, to heavy ion blaster, to a chest piece for Optimus Maximus!
Heavy ion Blaster mode has a 5mm handle and can be held by most action figures, or plugged into 5mm ports.
Figure also has three 5mm ports. One in the spoiler, and two either side of the body, behind the wheels.
This figure requires two metal rods to be pushed through the designated areas either side of the main body. These rods are held in place through friction alone. The current holes are 1/16” in diameter, and can easily be expanded by drilling them wider without significantly damaging the figure. It is recommended that the rods be carefully, completely inserted first, and then trimmed down. The rods should be anywhere from 1.5” - 1.7” long. Cut down paperclips work perfectly fine.
TFW2005 Post here:
http://www.tfw2005.com/boards/threads/combiner-wars-roller-3d-print-shapeways.1163132/
Details
What's in the box:
Roller components
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$41.06
$6.68
