Universal Chassis-36mm Front (INL,Slim,Flgd bush)
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$22.00
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Universal Chassis-36mm Front (INL,Slim,Flgd bush)
- Rear uses flanged bushes (Slot It PA02)
- Takes the slim can motor (Shaft lengths 8, 10 & 14mm) (inline config.)
- Chassis rear width 24mm.
- Rear ride height adjustment of 1.5mm, using M2 grub screws.
- Wheelbase 95mm (max) & 62mm (min) after trimming.
- Screws needed: M2.2 screws for Body posts, Rear axle brackets & fixing nuts. M2 grub screws for ride height adjustment & mounting motor brackets.
- Motor bracket #1 used for front of motor & bracket #2 used for rear of motor.
- Slim motor with 8mm shaft uses set of holes closest to axle.
- Slim motor with 10mm shaft uses set of holes 2nd closest to axle.
- Slim motor with 14mm shaft uses set of holes furthest from axle.
- Front axle ride height adjustment of 2.5mm, using M2 grub screws.
- Front end option to fit Slot it spherical bushes (CH56b) (height adjustment 1.5mm), Please watch video.
- M2 grub screws needed for height adjustment.
- Screw-in guide recommended instead of clip-in guide.
- Motor wire fixing under the front axle.
- Some trimming may be needed due to the nature of 3D printing.
Parts Included:
1x Front End
1x Rear End
2x Rear Axle Brackets
2x Fixing Nuts
2x Body Posts
General Notes:
Colors are slightly more flexible then Black, White is slightly more flexible then colors.
(Ref: JA88)
- Rear uses flanged bushes (Slot It PA02)
- Takes the slim can motor (Shaft lengths 8, 10 & 14mm) (inline config.)
- Chassis rear width 24mm.
- Rear ride height adjustment of 1.5mm, using M2 grub screws.
- Wheelbase 95mm (max) & 62mm (min) after trimming.
- Screws needed: M2.2 screws for Body posts, Rear axle brackets & fixing nuts. M2 grub screws for ride height adjustment & mounting motor brackets.
- Motor bracket #1 used for front of motor & bracket #2 used for rear of motor.
- Slim motor with 8mm shaft uses set of holes closest to axle.
- Slim motor with 10mm shaft uses set of holes 2nd closest to axle.
- Slim motor with 14mm shaft uses set of holes furthest from axle.
- Front axle ride height adjustment of 2.5mm, using M2 grub screws.
- Front end option to fit Slot it spherical bushes (CH56b) (height adjustment 1.5mm), Please watch video.
- M2 grub screws needed for height adjustment.
- Screw-in guide recommended instead of clip-in guide.
- Motor wire fixing under the front axle.
- Some trimming may be needed due to the nature of 3D printing.
Parts Included:
1x Front End
1x Rear End
2x Rear Axle Brackets
2x Fixing Nuts
2x Body Posts
General Notes:
Colors are slightly more flexible then Black, White is slightly more flexible then colors.
(Ref: JA88)
Details
What's in the box:
SPW-Uni-Inl_Slim-FB-Chassis-36mm-Front
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
