Black Premium Versatile Plastic
Toyota steering wheel emblem overlay TRD
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$25.47
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is an overlay to cover up the ugly chrome Toyota logo on your steering wheel.
TRD letters are not included. They can be found HERE
Fitment -
This is designed to fit the 3rd gen Tacoma. 12+ Tacoma, 10+ 4Runner, and 14+ Tundra Share the same steering wheel so it will fit all without issue. Even steering wheels of different designs seem to use the same logo but some modification may be necessary to get it to sit flush. The dimensions of the emblem this is designed to fit are 65mm wide and 44mm tall
How to install -
Installation is very easy and requires no modification to the vehicle (unless you have a different steering wheel than the one in the listing picture). You will need some 1/8” strips of double sided tape (I recommend 3M VHB), and some isopropyl alcohol.
I strongly recommend disconnecting the battery for this, you will honk the horn!
Clean the back of the overlay and stock chrome emblem with alcohol. Once dry, apply double sided tape to the front face of the chrome emblem (an inch long strip across the middle is plenty), then peel the backing off the other side of the tape and gently center the overlay over the stock emblem. Once your happy with its location press firmly on the center of the overlay, securing it into place. Enjoy your chrome free steering wheel!
TRD letters are not included. They can be found HERE
Fitment -
This is designed to fit the 3rd gen Tacoma. 12+ Tacoma, 10+ 4Runner, and 14+ Tundra Share the same steering wheel so it will fit all without issue. Even steering wheels of different designs seem to use the same logo but some modification may be necessary to get it to sit flush. The dimensions of the emblem this is designed to fit are 65mm wide and 44mm tall
How to install -
Installation is very easy and requires no modification to the vehicle (unless you have a different steering wheel than the one in the listing picture). You will need some 1/8” strips of double sided tape (I recommend 3M VHB), and some isopropyl alcohol.
I strongly recommend disconnecting the battery for this, you will honk the horn!
Clean the back of the overlay and stock chrome emblem with alcohol. Once dry, apply double sided tape to the front face of the chrome emblem (an inch long strip across the middle is plenty), then peel the backing off the other side of the tape and gently center the overlay over the stock emblem. Once your happy with its location press firmly on the center of the overlay, securing it into place. Enjoy your chrome free steering wheel!
Details
What's in the box:
TRD Overlay V5
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
