You must be logged in and verified to contact the designer.
Product Description
Tested with: PLA - 30%, 40%, 50%, 60%, & 100% infill. (60%+ recommended) ABS - 65% infill. ASA - 25%, & 30% infill. PETG - [TEST PENDING] NYLON - [TEST PENDING] Requires additional hardware.
Uses 6, 3-5mm long, M3 socket bolts. If for some reason the bolts are too long you can use washers to offset the bolt depth. (Video of assembly thanks to Captain Xavier) https://youtu.be/Cu7qpHWsv_s Place the grip over the slide and mark the Kronos slide, through the bolt holes with a sharpie. Remove the slide, and drill the marked holes. replace the slide and bolt the grip on. Be sure the bolts are not too long or the slide will seize up. Graphical assembly instructions are coming soon.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: