Klone fighter upgrades

This is a compilation of upgrade parts for the 3-seater Rewell Klone fighter kit (the larger one, NOT the pocket version - the scale is somewhere between 1/60 to 1/70). All parts except for one are for the ship´s exterior. All parts have duplicates in case one gets damaged during separation from the "sprue".

Please be aware that for some parts´ instalation cutting away sections of the original kit will be required! In addition to the following description, please consult reference pictures and screenshots for correct parts placement.

This set includes (see picture with numbers):

1: At the end of each engine´s "mechanical section" is a narrow circumferential groove. Use 2 half-rings to fill this groove.
2: Inserts for the engine nozzles (nozzles must be drilled open for upgrade installation).
3: Backplate detail - cut back plate of the kit´s fuselage to install this piece.
4: Rear bracket which guides the articulated wings´ movement on the engines.
5: Forward bracket which guides the articulated wings´ movement on the engines.
6: Small blocks sitting on the forward wing roots next to the engine cowlings.
7: Rear gun turrets. Insert 38 mm long brass tubing of diameter 1.4 mm as gun barrels.
8: Muzzles for rear gun turrets.
9: One arc goes under the pilot´s canopy, right behind the "windscreen", as support for the canopy structure.

If you have doubts about part placement don´t hesitate to contact me!