VSS Barrel Picatinny Rails

Mock Silencer Picatinny weaver rail for the VSS Vintorez airsoft electronic gun (AEG). The airsoft VSS Vintorez is a replica of a Russian sniper rifle, which does not have any Picatinny rails. It has a large diameter barrel. Therefore, this special Picatinny ring adapter is necessary. This Picatinny rail is specially made for the airsoft VSS Vintorez. It is made to fit the large 40mm diameter silencer and provide you with three Picatinny mount points for your accessories. You can orient it so that you have a top or bottom Picatinny weaver mount. Two side mounts allow you to mount accessories to either side of the gun. For heavy duty use, such as mounting a foregrip or a M203 Grenade Launcher, fasten two or three of these VSS Barrel Picatinny Rails in a row to provide rigidity. Airsoft VSS Vintorez guns that are compatible with this rail: 1) AY VSS Vintorez; 2) Echo1 Red Star IGOR; 3) S&T VSS Vintorez. This Airsoft3D accessory also fits any tube or rod that is 40mm in diameter. It may fit other airsoft VSS Vintorez, because the silencer is likely going to be 40mm in diameter. You will also need a #10-32x2" screw, a #10-32 nut, and two #10 washers to fasten this tri-rail to the barrel. The screw, nut, and washers are not included, but can be easily sourced from your local hardware store (e.g. Home Depot, Lowes, etc.). Airsoft equipment and Contour camcorder used for illustration of this VSS Barrel Picatinny Rails adapter are not included. Installation instructions is available on the following web page: http://www.gearhack.com/myink/ViewPage.php?file=docs/Airsoft/VSS%20Barrel%20Picatinny%20Rails%20Review WARNING: Although you can use this mount adapter on your real firearm, we have never tested it on a real firearms before. We do not know if the firearm heat/recoil will or will not damage it or the object(s) you will fasten to it. Use it with real firearms at your own risk.