Black Natural Versatile Plastic
Twin Hammers WL10428 'Manta' Bell Crank Steering
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$34.31
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Arguably the single best modification to be made to the Vaterra Twin Hammers, bell crank steering will make a big improvement to the handling of your rig. This v2 'Manta' version is stronger, simpler, and cheaper than the already proven v1. This high quality Laser Sintered design is super durable for the hardest of drivers. With the additional hardware listed below, it's a direct replacement with no additional mods. The standard body and frame require no changes. Double bellcrank steering will transform the handling of your rig, giving smooth, precise turning with servo power going right to the wheels rather than into the poorly designed plastic sliding rack. Geometry is also refined over the stock setup to reduce bump steer to near zero. Servo turn angle is maximised to get the strongest performance from your servo.
Extra Required hardware:
M3x30 button head screw x2.
M3x22 button head screw x2.
M3 locking nut (non flanged) x 4
Four 3*6*2.5 bearings are required for the crank arms.
3mm turn buckle link arm (55mm eye to eye)
Servo Horn, 16mm with space for rear face fitting, such as a TLR1557 (with correct teeth for your servo)
You can also use cheaper aluminium horns found on ebay, and bend them outwards slightly to fit. Full hardware kits are available from Scorched Parts in the uk. Please contact for details. Full support for this product is offered. If you have any issues at all, please let me know, I'll be pleased to help. If you love it - please let others know! Follow Scorched Parts on facebook for all the latest developments https://www.facebook.com/scorchedrc/
Extra Required hardware:
M3x30 button head screw x2.
M3x22 button head screw x2.
M3 locking nut (non flanged) x 4
Four 3*6*2.5 bearings are required for the crank arms.
3mm turn buckle link arm (55mm eye to eye)
Servo Horn, 16mm with space for rear face fitting, such as a TLR1557 (with correct teeth for your servo)
You can also use cheaper aluminium horns found on ebay, and bend them outwards slightly to fit. Full hardware kits are available from Scorched Parts in the uk. Please contact for details. Full support for this product is offered. If you have any issues at all, please let me know, I'll be pleased to help. If you love it - please let others know! Follow Scorched Parts on facebook for all the latest developments https://www.facebook.com/scorchedrc/
Details
What's in the box:
Hammers bell crank
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
