White Natural Versatile Plastic
Replacement Part for Ikea JULES Chair Foot
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$15.61
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Hey guys, this is a replacement plastic part for the JULES chair castor (wheel) holder. This is not the entire castor just the part the castor slides into. Please look at the product rendering to make sure it looks like the part you need. You can find this chair at:
http://www.ikea.com/us/en/catalog/products/S49884532/
but don't forget that Ikea also charges a whole mess-of-heap-of for shipping.Also I reinforced the area where the original IKEA part seems to keep breaking. Don't buy a whole new chair just to replce one little part...think of the planet. Let me know if you need any other parts for JULES or any other Ikea products and I will be more than happy to make them. 3D printing rocks!
This part has been printed, tested, and fits prexisting Ikea parts perfectly but be aware that 3D printed parts have a +/- tolerance of about .1mm so you might have to clean out some small holes with a toothpick or pin. Also areas with tight fits might need to be slightly filed or sanded. Nothing that takes more than a few seconds of work.
Need a part we don't have in our Shapeways store, don't worry we'll make it for you. Just fill out the "Part Request Form" at http://petesparts.infinitediscounts.com/ and your request will automatically be emailed to us.
Be sure to check out other parts I have in the shop by clicking IKEA Replacement Parts
http://www.ikea.com/us/en/catalog/products/S49884532/
but don't forget that Ikea also charges a whole mess-of-heap-of for shipping.Also I reinforced the area where the original IKEA part seems to keep breaking. Don't buy a whole new chair just to replce one little part...think of the planet. Let me know if you need any other parts for JULES or any other Ikea products and I will be more than happy to make them. 3D printing rocks!
This part has been printed, tested, and fits prexisting Ikea parts perfectly but be aware that 3D printed parts have a +/- tolerance of about .1mm so you might have to clean out some small holes with a toothpick or pin. Also areas with tight fits might need to be slightly filed or sanded. Nothing that takes more than a few seconds of work.
Need a part we don't have in our Shapeways store, don't worry we'll make it for you. Just fill out the "Part Request Form" at http://petesparts.infinitediscounts.com/ and your request will automatically be emailed to us.
Be sure to check out other parts I have in the shop by clicking IKEA Replacement Parts
Details
What's in the box:
Jules Chair Foot
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
