Prototype NOT PRINTED BY SHAPEWAYS
iPhone XR Mount for Fanatec steering wheel base
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$24.29
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Create your very own DIY sim racing dashboard by mounting your iPhone XR to your Fanatec wheelbase.
Tested with a Fanatec CSW2.5 wheelbase. The centre-to-centre distance between the slots on the phone mount is 56mm. You will need to supply your own mounting bolts. I used M6 x 16mm bolts.
Note the photo shows my prototype print. To reduce print costs I reduced the height of the phone mount since printing the prototype, it no longer fully encloses the lightning connector.
If there is demand I plan to make this available to fit other phones. Contact me if you have a request.
Tested with a Fanatec CSW2.5 wheelbase. The centre-to-centre distance between the slots on the phone mount is 56mm. You will need to supply your own mounting bolts. I used M6 x 16mm bolts.
Note the photo shows my prototype print. To reduce print costs I reduced the height of the phone mount since printing the prototype, it no longer fully encloses the lightning connector.
If there is demand I plan to make this available to fit other phones. Contact me if you have a request.
Details
What's in the box:
Phone_Mount_v3
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
