White Natural Versatile Plastic
Atom Sabers Chief Librarian Proffie Chassis P1
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$47.31
Basic Materials Best Value
Shop Owner Recommendations
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Chassis for the AtomSabers Chief Librarian hilts.
For this chassis you will also require the P2 aligner of the design.
This is a removable battery design. The battery tabs required are the type shown in the link below:
https://www.ebay.co.uk/itm/20Pairs-18650-Battery-Negative-to-Positive-Conversion-Spring-Contact-16-5mmx16mm/362591431441?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
This chassis is designed for use with:
-Proffie Board
-KR Sabers 24mm Bass speaker
-18650 Lithium Ion Battery
-High Amp kill switch
-Shtok Short Pin Hilt side LED PCB (most likely requires sanding down on the outside diameter)
- 4.3mm tactile switche
If you choose to install it, the kill switch requires gluing in to place once everything is wired up and tested. We recommend a dab of hot glue from behind to secure it.
If you struggle inserting the battery tabs, I suggest carefully warming the tabs with a clean soldering iron as inserting them. It will help for the plastic surrounding the tabs to grip them.
The chassis is design for the board to slide into position once tested. We recommend this as the final step. Plan your wiring ahead of time!
Handle with care.
Any damage occurred during installation is the responsibility of the individual installer.
For this chassis you will also require the P2 aligner of the design.
This is a removable battery design. The battery tabs required are the type shown in the link below:
https://www.ebay.co.uk/itm/20Pairs-18650-Battery-Negative-to-Positive-Conversion-Spring-Contact-16-5mmx16mm/362591431441?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
This chassis is designed for use with:
-Proffie Board
-KR Sabers 24mm Bass speaker
-18650 Lithium Ion Battery
-High Amp kill switch
-Shtok Short Pin Hilt side LED PCB (most likely requires sanding down on the outside diameter)
- 4.3mm tactile switche
If you choose to install it, the kill switch requires gluing in to place once everything is wired up and tested. We recommend a dab of hot glue from behind to secure it.
If you struggle inserting the battery tabs, I suggest carefully warming the tabs with a clean soldering iron as inserting them. It will help for the plastic surrounding the tabs to grip them.
The chassis is design for the board to slide into position once tested. We recommend this as the final step. Plan your wiring ahead of time!
Handle with care.
Any damage occurred during installation is the responsibility of the individual installer.
Details
What's in the box:
Proffie
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
