Warflat_50t_3mm_27_bogies_00

A pair of spare bogies for the 3mm Warflat model, in case you break one,  or just fancy some to use for a different project. They include wheels, a NEM pocket at one end (saw it off if you don't want it) and the pivot, just the same as on the Warflat model. The wheels can be lifted out of the upturned bogie by gently flexing the arms of the bogie apart, very slightly. The pivot can be removed by cutting off the little pegs at the bottom and ifting the bogie off it. As on the Warflat model, if the bogie is delivered to you stuck on the pivot and unable to turn freely, or to come off the pivot after you have removed the pegs, it may be helpful to warm the model up in hot (not boiling) water, maybe with a little detergent in it. Take it slowly and brush around the join to remove whatever you can of whatever printing residue is filling the gaps. Be patient while it warms up, and don't force it to turn unless you are confident about how much stress the material will take before something snaps.