Click and drag to rotate
Tippmann M4 V1 Hop Up Nub - Enhanced regular 3d printed

DIGITAL PREVIEW
Not a Photo

White Natural Versatile Plastic
Tippmann M4 V1 Hop Up Nub - Enhanced regular 3d printed
Tippmann M4 V1 Hop Up Nub - Enhanced regular 3d printed

DIGITAL PREVIEW
Not a Photo

Tippmann M4 V1 Hop Up Nub - Enhanced regular

Print With Shapeways
Choose Your Material
$9.64
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
This nub maintains the functionality of the original (regular) nub but with a larger diameter so that the play between the nub and the hole where it sits gets reduced. This results in a better grouping.

Worth mentioning: The print quality/finish on these nubs are better than the standard quality from Sculpteo, since they're printed in a higher end printer.

If you want to try some other variants, take a look here for other options.

Installation description:


Make sure that the top arrow is pointing towards the hole where the adjustment screw sits. Double check the orientation. While pressing down the nub, assemble the adjustment screw and give it a couple of turns. This step is important, as you could damage the nub if the screw doesn't orient inside the key shaped hole! If you're not experiencing any hop up and you're sure that the bucking is correctly installed, then you may have installed the nub incorrectly.
Details
What's in the box:
regular_round_745
Dimensions:
0.75 x 1.08 x 0.75 cm
Switch to inches
0.29 x 0.43 x 0.29 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.