Clear Ultra Fine Detail Plastic
1:8 BTTF DeLorean Front Flux boxes withOUT screws
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$30.49
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Please note: this is the version withOUT screws to which you can add scale model screws for maximum realism.
Description
Accurate 1:8 scale roof Flux boxes replicas for the Fanhome / Eaglemoss 1:8 DeLorean model.
This set replaces stock parts:
What's in the box
Design
These Flux boxes have been designed so that you can use Top Studio scale model rivets in two different sizes. Use 0.8 mm screws (TD23104) for the ones that attach to the aluminium plates and 1.0mm screws (TD23106) for the ones that attach directly to the Flux boxes. You will need 44 x 0.8mm rivets and 20 x 1.0mm rivets for this set.
Furthermore the "aluminium" plates that cover the screws have been designed in such a way that you can glue a 3x1 mm magnet (3mm diameter and 1 mm thick) on the back of the plates so that you are able to unmount them if you ever need to access the screws.
A more robust way of attaching the leds is also included in this design.
Use AP screws to screw the bottom plates in place.
Assembly
A video tutorial with more explanation on how to properly install them is coming soon.
Description
Accurate 1:8 scale roof Flux boxes replicas for the Fanhome / Eaglemoss 1:8 DeLorean model.
This set replaces stock parts:
- 98A / 98B / 98C / 98D / 98E
What's in the box
- Front Flux box left (marked with FL)
- Roof Flux box right (marked with FR)
- "Aluminium" plates for left and right flux boxes
- Bottom plates for the left and right flux boxes
Design
These Flux boxes have been designed so that you can use Top Studio scale model rivets in two different sizes. Use 0.8 mm screws (TD23104) for the ones that attach to the aluminium plates and 1.0mm screws (TD23106) for the ones that attach directly to the Flux boxes. You will need 44 x 0.8mm rivets and 20 x 1.0mm rivets for this set.
Furthermore the "aluminium" plates that cover the screws have been designed in such a way that you can glue a 3x1 mm magnet (3mm diameter and 1 mm thick) on the back of the plates so that you are able to unmount them if you ever need to access the screws.
A more robust way of attaching the leds is also included in this design.
Use AP screws to screw the bottom plates in place.
Assembly
A video tutorial with more explanation on how to properly install them is coming soon.
Details
What's in the box:
Front_G7_E6_print
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
