SCX24 Low CG ESC/RX Mount + Shock Towers

The Low CG ESC/RX Mount is actually four mods in a single package! First up is the new, lowered ESC/RX mount that is 9mm lower than stock on the Deadbolt and about 3mm lower on the Jeep/C10. SLS Nylon is a great material in a lot of ways, but it doesn't like to stick to double-sided tape unless it has been painted. So this mount uses clips to help hold in the ESC/RX keeping it securely in place.

Integrated in the mount are new shock towers that match the Mod19RC rear shock towers. They feature four mounting holes. The stock location is retained, and adjustments in ride height and the ability to use longer shocks are now possible.

In order to be able to get the ESC/RX as low as possible and not interfere with the steering servo, the wheelbase has been stretched 2mm. New lower links and a new upper wishbone are included. You will need to carefully  transfer the ball inserts from the stock components before installing them.  This is only required on the Deadbolt version of the SCX24.

Additionally, the wishbone has a relief cut into it to prevent the driveshaft from rubbing which is common issue on stock trucks. (Deadbolt version only)

**IMPORTANT** You should use either a 1.1mm or a #57 (.043") drill bit to clean out the screw holes. There is always a small amount of unsintered powder left in deep holes despite the cleaning process.