White Natural Versatile Plastic
1CRU (v2)- Creepy Uncle v3 Proffieboard v2.2
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$34.25
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1 (Main) part of Chassis for Creepy Uncle v3 hilt for Proffieboard v2.2 soundboard
OPEN SIDE for access to SD card and Micro USB port. No need to get chassis out
Components:
Proffieboard v2.2
21700 Battery
2.1 DC plug (Kill Key/charge)
Pogo Pin Connector (from ShtockCustomWorx or TCSS) (!!!Short pins!!!) (on pictures below- wrong connector with long pins. It can be used , but you need to cut some length from 3CR - "Red part")
C&K TS01CBE switch for killkey (Killswitch)
You can switch Pins / Clear PCB board inside /outside emitor. if you use PCB board with leds on it - better install it to main chassis, to light it up.
OPEN SIDE for access to SD card and Micro USB port. No need to get chassis out
Components:
Proffieboard v2.2
21700 Battery
2.1 DC plug (Kill Key/charge)
Pogo Pin Connector (from ShtockCustomWorx or TCSS) (!!!Short pins!!!) (on pictures below- wrong connector with long pins. It can be used , but you need to cut some length from 3CR - "Red part")
C&K TS01CBE switch for killkey (Killswitch)
You can switch Pins / Clear PCB board inside /outside emitor. if you use PCB board with leds on it - better install it to main chassis, to light it up.
Details
What's in the box:
LUK_Poly_Base2-OUT2
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
