JK17018 SCX10ii Magnet mount plates large
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$18.06
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
JK17018 SCX10ii Magnet mount plates large. For the SCX10ii. adjustable plates that make is easier to create magent mounts for you SCX10ii.
We recommend using the following magents glued in place with Shoe Goo (both sold separately).
1/2 x 1/4 x 1/8 Inch Strong Neodymium Rare Earth Ring/Donut Magnets N48 (20 Pack) Link:
https://totalelement.com/products/1-2-x-1-4-x-1-8-inch-neodymium-rare-earth-ring-magnets-n48-20-pack
Installation steps.
1. Install replacement body posts into the chassis.
2. Using M3x5mm countersunk screws, fix one magnet to the top of each body post.
3. place a second magnet on the top of each body post and lightly scuff the top surface of the magent
4. Using Shoe Goo or E6000 glue the mount plates on top of the magnets.
5. Once dry, apply more Shoe Goo or E6000 to the top of the mount plate and then place body in the dersired location.
6. Allow to glue to fully cure overnight before removing body for the first time.
7. Magnets should now be mounted firmly to the underside of the body.
We recommend using the following magents glued in place with Shoe Goo (both sold separately).
1/2 x 1/4 x 1/8 Inch Strong Neodymium Rare Earth Ring/Donut Magnets N48 (20 Pack) Link:
https://totalelement.com/products/1-2-x-1-4-x-1-8-inch-neodymium-rare-earth-ring-magnets-n48-20-pack
Installation steps.
1. Install replacement body posts into the chassis.
2. Using M3x5mm countersunk screws, fix one magnet to the top of each body post.
3. place a second magnet on the top of each body post and lightly scuff the top surface of the magent
4. Using Shoe Goo or E6000 glue the mount plates on top of the magnets.
5. Once dry, apply more Shoe Goo or E6000 to the top of the mount plate and then place body in the dersired location.
6. Allow to glue to fully cure overnight before removing body for the first time.
7. Magnets should now be mounted firmly to the underside of the body.
Details
What's in the box:
JK17018 SCX10ii Magnet mount plates large
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$55.05
$24.72
