You must be logged in and verified to contact the designer.
Product Description
Competion Cut (high-clearance) skid for the Forward Motor setup. V2 and V3 chassis rails.
Give your rig the edge it needs to clear those rocks!
Please read details below***
Hardware needed:
4 each, M3x16mm long grub screws are required for the lower links, and installed ablout 12mm beep from the insertion face/surface - these are new to the setup.
4 each, M3x8mm long flat head screws to mount the transfercase - two existing from original setup.
4 each, M3x8mm long button head screws - these mount the skid to the CF chassis rais (original setup).
4 each, M3x10mm long button head screws - these mount the electronics tray (original setup).
***Pre-drill all of the small holes with a 3/32" drill, and we recommend tapping the lower link holes with a starter/tapered M3x0.5mm tap***
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: