Gray PA12
DriverSideDif Margo - Version 1
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$22.84
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
THIS IS NOT THE TYPICAL MARGO SETUP.
The Margo setup, traditionally, has the differential on the passenger side (right side) of the car.
This Barber is for optional setups that need the lower bolt of the axle but uses a driver side differential.
The barber is a dif cover for an extreme shave on the AR60 axle.
This is the Heavy Duty version.
After well over 50 units sold I had one failure report.
One straight hit with a shap rock on the barber broke it's chin...
I decided to now include a reinforced version with +0.8mm at the bottom and +1.8mm in the front (almost double the thickness).
If you drive on very sharp rocks or are very hard on your parts then this is the version for you!
THIS PART IS NOT SYMETRICAL
(pictures ofthe axle is just an example).
Before you buy pay atention on the Ring Gear side of your axle and chose part version accordingly.
Take your time cutting the AR60 housing and test fit often, once you cut too much, there's no coming back... ;D
I sugest printed in HP MJF Nylon and SLS Nylon.
https://www.facebook.com/groups/1408793109319307/
The Margo setup, traditionally, has the differential on the passenger side (right side) of the car.
This Barber is for optional setups that need the lower bolt of the axle but uses a driver side differential.
The barber is a dif cover for an extreme shave on the AR60 axle.
This is the Heavy Duty version.
After well over 50 units sold I had one failure report.
One straight hit with a shap rock on the barber broke it's chin...
I decided to now include a reinforced version with +0.8mm at the bottom and +1.8mm in the front (almost double the thickness).
If you drive on very sharp rocks or are very hard on your parts then this is the version for you!
THIS PART IS NOT SYMETRICAL
(pictures ofthe axle is just an example).
Before you buy pay atention on the Ring Gear side of your axle and chose part version accordingly.
Take your time cutting the AR60 housing and test fit often, once you cut too much, there's no coming back... ;D
I sugest printed in HP MJF Nylon and SLS Nylon.
https://www.facebook.com/groups/1408793109319307/
Details
What's in the box:
DriverSide_Margo_Tampa_V4_HD_MIRROR
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
