Black PA12
Nerd2 Revo mount extension
Made by
Print With Shapeways
Choose Your Size
Choose Your Material
Choose your color and finish
Choose Your Size
$13.24
Choose Your Material
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
An extension to use with the Revo Nerd 2 mount (R594) that moves the position of the Nerd 10mm or 20mm to the left or right of the mounting point on the BOV/DSV.
This extension is designed to work with the Revo Nerd 2 mount (R594) but may potentially work with other Nerd 2 mounts. I only have the R594 to test against.
Note: This part requires you to do some work to use it. You'll need to drill a hole partially through the center of the bottom cylinder protrusion and then tap the hole. This is where the 20mm screw is used.
Variants:
Medium - Adds 10mm to the length of the original part
Large - Adds 20mm to the length of the original part
Required hardware and tools:
M4-0.7 x 20mm Socket Head Cap screw (Stainless Steel)
M4-0.7 x 40mm Socket Head Cap screw (Stainless Steel) (Only for Medium/10mm extension)
M4-0.7 x 50mm Socket Head Cap screw (Stainless Steel) (Only for Large/20mm extension)
M4-0.7 Nylon Lock Nut (Stainless Steel)
M4-0.7 Bottoming Tap
3.30mm Drill bit
This extension is designed to work with the Revo Nerd 2 mount (R594) but may potentially work with other Nerd 2 mounts. I only have the R594 to test against.
Note: This part requires you to do some work to use it. You'll need to drill a hole partially through the center of the bottom cylinder protrusion and then tap the hole. This is where the 20mm screw is used.
Variants:
Medium - Adds 10mm to the length of the original part
Large - Adds 20mm to the length of the original part
Required hardware and tools:
M4-0.7 x 20mm Socket Head Cap screw (Stainless Steel)
M4-0.7 x 40mm Socket Head Cap screw (Stainless Steel) (Only for Medium/10mm extension)
M4-0.7 x 50mm Socket Head Cap screw (Stainless Steel) (Only for Large/20mm extension)
M4-0.7 Nylon Lock Nut (Stainless Steel)
M4-0.7 Bottoming Tap
3.30mm Drill bit
Details
What's in the box:
Nerd2 Revo mount - Plus 10mm-Body
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
