1/48 DC Release Track Mk 9 Mod 0 (Starboard) V2
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$62.52
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1/48 High details model Depth Charge Release Track Mk 9 Mod 0 (Starboard) for USN vessel.
Suitable for: WWII USN Patrol Craft, PGM boats and USN Destroyers.
Real scaled from original
Hollowed to saved material.
Model unpainted.
If you need a different size or a custom part designed just for you?
Please send me a PM.
Some part cleanup will be necessary. During the 3D printing process, a waxy substance is used to support certain part features. Although the parts are cleaned by Shapeways afterwards, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like “Dawn” dishwashing detergent, baby shampoo (no conditioner) or "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. Customers report that "Bestine" and "Goo Gone" also work well.
During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured. Let your parts sit in direct sunlight for a few hours to fully cure the resin before painting.
Once your parts are fully cured, if desired, careful use of an inexpensive “air eraser” emitting common household baking soda can help smooth surfaces and remove any unwanted “frost”. Similar to an airbrush but much cheaper, air erasers can be found on Amazon.com. Models by Harbor Freight and Paasche are popular.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Suitable for: WWII USN Patrol Craft, PGM boats and USN Destroyers.
Real scaled from original
Hollowed to saved material.
Model unpainted.
If you need a different size or a custom part designed just for you?
Please send me a PM.
Some part cleanup will be necessary. During the 3D printing process, a waxy substance is used to support certain part features. Although the parts are cleaned by Shapeways afterwards, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like “Dawn” dishwashing detergent, baby shampoo (no conditioner) or "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. Customers report that "Bestine" and "Goo Gone" also work well.
During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured. Let your parts sit in direct sunlight for a few hours to fully cure the resin before painting.
Once your parts are fully cured, if desired, careful use of an inexpensive “air eraser” emitting common household baking soda can help smooth surfaces and remove any unwanted “frost”. Similar to an airbrush but much cheaper, air erasers can be found on Amazon.com. Models by Harbor Freight and Paasche are popular.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Details
What's in the box:
1/48 DC Release Track Mk 9 Mod 0 Right
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$15.42
$15.65
