Mills Post Time- Large Payout Wheel

Modeled here is the large component to the payout assembly of "Post Time" by Mills Novelty Company. This part has been modeled from an original part as close to original dimensions possible. There are some tolerances from printing that may create interference but these could be sanded out if necessary.  Please be aware of this possibility. After a first print of a nickel plated part, the slides that are sandwiched between the payout wheels are tight and some material needs removal by sanding the steps where the slides install on this part. Shimming the center between the wheels may eliminate this but at this point hasn't been attempted. It was suggested by the first customer to leave the model as is with additional material that can be removed as necessary for a custom fit.

If using the ratchet sold on this site rather than the original, it is recommended to use three (3) of each to complete the assembly:
https://www.mcmaster.com/90283A114/    4-40 thread 7/8" length screw
https://www.mcmaster.com/90730A005/  4-40 thread narrow hex nut

https://www.ipdb.org/machine.cgi?id=1854