SID Chassis ECO V2 Tri-Cree LED

Chassis Parts List:
​https://docs.google.com/document/d/19grV0TUsesSdPn9HaUEEmaBkpeOUtj6f/
Features:

• with a Crystal Chamber
• removable 18650 Protected battery
• 2.1mm recharge port support
• high power Kill Switch support
• bluetooth module support
• Prizm v5.5, Crystal Shard, Nano Biscotte, Verso, Proffieboard sound boards support
• accent leds
• red and green buttons backlight leds

Cheaper chassis variant for Tri-Cree high power LED setup, single part Version 2. Can be used with a sound board Cover plate part or without it. Has a Crystal Chamber, supports a crystal and a metal "energy gate" part: SID CC Part 4 V1
Requires a separate Speaker Holder part: 22mm Speaker Holder
Chassis can be printed only in plastic, PA12 material recommended.

For this chassis assembly you also need:

• x1 special SCW SID Tri-Cree LED heat sink module (in brass or aluminum)
• x1 "pin" and x1 "leaf" battery contacts from a Keystone 1042P 18650 battery holder
• x2 momentary tactile switches with brass buttons (1.6mm type): brass tactile switch
• x1 Kill Switch (optional): High Power Kill Switch
• x2 4mm OD 92mm long brass/aluminum/copper tubes
• x4 1mm OD 11mm long brass/aluminum/copper rods for the crystal chamber fins
• x2 1mm OD 37mm long brass/aluminum/copper rods for the chassis battery section side accents 
• x6 M3 (or similar size) set screws to attach LED heat sink to the chassis (x3) and to attach chassis to the pommel (x3)
• x1-2 5mm LED (for crystal chamber)
• x2 3mm leds (red and green) for buttons backlight
• x2 3535 (mini) SK6812 neopixel strip segments of 5 pixels (144 leds/m) for side accent pixels
• sound board, 22-23mm speaker, Tri-Cree LED, bluetooth module, 18650 Protected battery, 2.1mm recharge port, accent leds etc.
• Optional: chrome marker to paint over the 18650 battery (remove the battery heat shrink layer before) then use a new clear heat shrink like the one from this set to cover and protect the paint