White Processed Versatile Plastic
DV6 - Part (5/7) Shell
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$34.47
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Chassis for Parks/Korbanth DV6
The outer shell to be mounted to the chamber top via magnets. The magnets from the chamber top (3x2mm/ODxheight) have to be glued.
Pay attention to the polarity of each magnet to its matching one in the chamber top.
The smaller holes next to the chamber are for 1.5mm brass rods for optical upgrades.
They can optionally be as long as they rech the speakerholder. But you don't have to.
Pictured install guide here on facebook:
https://www.facebook.com/pg/gonk3d/photos/?tab=album&album_id=564153247277719
The shell acts as optical upgrade and covering the wires going through the chamber's wire lead.
May require some sanding and widening of the holes for your rods.
The outer shell to be mounted to the chamber top via magnets. The magnets from the chamber top (3x2mm/ODxheight) have to be glued.
Pay attention to the polarity of each magnet to its matching one in the chamber top.
The smaller holes next to the chamber are for 1.5mm brass rods for optical upgrades.
They can optionally be as long as they rech the speakerholder. But you don't have to.
Pictured install guide here on facebook:
https://www.facebook.com/pg/gonk3d/photos/?tab=album&album_id=564153247277719
The shell acts as optical upgrade and covering the wires going through the chamber's wire lead.
May require some sanding and widening of the holes for your rods.
Details
What's in the box:
DV6-Shell
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$9.00
$9.00