You must be logged in and verified to contact the designer.
Product Description
Crystal chamber chassis for the D.L. Crimson Lord Gen 2 hilt only.
For this chassis you will also require P2 & P3 to complete the chassis.
This is a removable battery design.
This chassis is designed for use with:
-Two Proffie Board
-Two KR Sabers 22mm Bass speaker
-Two 18650 Lithium Ion Battery
-Two spring loaded battery tabs (https://www.saberbay.com/products/18650-removable-battery-contacts?_pos=6&_sid=0ee30c01a&_ss=r) -Two High Amp Kill Switches
-Four metal 4x4x1.5mm SMD tactile switches
-Two Crystals or my generic chassis crystal (found on shapeways) and two single neo pixels
-Two Shtok Short Pin Hilt side LED PCB (most likely requires sanding down on the outside diameter)
After wires are soldered to the battery tabs, I suggest carefully heating up the battery tabs to insert them in to the chassis. This not only makes it alot easier to insert them, but also forms the plasic around them, holding them far better.
Handle with care.
Any damage occurred during installation is the responsibility of the individual installer.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: