I offer here the turret hood of the 380 mm gun turret Caesar or Dora for the battleships Bismarck and Tirpitz in 1/100 scale. The turret canopy is identical to turret hood Anton only with the side boxes for the 10 meter rangefinder. If you want to represent the state of construction until the end of the test runs you have to order this turret cover of the turrets Caesar and Dora also for turret Anton, these have the 10 meter range finder built in. The parts were made after construction drawings and original pictures.
The turret hood fits on my base plate with cradle and the gun barrels from my store.
In my store you can also find the turret hood For turret Bruno with flak platform
https://www.shapeways.com/product/WCS3F6TWL
as well as the turret hood for Anton without range finder.
https://www.shapeways.com/product/DWZ3TTC4K
All turret hoods fit on the base plate, and the gun tubes from my store are identical for all turret hoods.
The gun boxes with tubes are also available in my store. These are drawn with ammo chute and breechblocks.
https://www.shapeways.com/product/KPMK54DQK
The base plate with cradle is also available in my store.
https://www.shapeways.com/product/6E5XDP26R
The barbettes are also available including gear rim in the 2 heights for the turrets in my store.
low
https://www.shapeways.com/product/8WGK6AJQ8
high
https://www.shapeways.com/product/8X5QXGXLY
The grating for the platform of the tower hood Bruno is also available in my store.
https://www.shapeways.com/product/HM5UFLZCF
The 20 mm C/38 quadruple flak is also available in my store including penestral base.
https://www.shapeways.com/product/DN32FPYBF
Ich biete hier die Turmhaube des 380 mm Geschützturms Caesar oder Dora für die Schlachtschiffe Bismarck und Tirpitz im Maßstab 1/100 an. Die Turmhaube ist identisch zu Turmhaube Anton nur mit den seitlichen Kästen für die 10 Meter Entfernungsmesser. Wenn sie den Bauzustand bis Ende der Erprobungsfahrten darstellen wollen müssen sie diese Turmhaube des Türme Caesar und Dora auch für Turm Anton bestellen, diese haben den 10 Meter Entfernungsmesser eingebaut. Die Teile wurden nach Konstruktionszeichnungen und Orginalbildern erstellt.
Die Turmhaube passt auf meine Grundplatte mit Wiege und den Geschützrohren aus meinem Shop.
In meinem Shop gibt es auch die Turmhaube Für Turm Bruno mit Flakplattform
https://www.shapeways.com/product/WCS3F6TWL
sowie die Turmhaube für Anton ohne Entfernungsmesser.
https://www.shapeways.com/product/DWZ3TTC4K
Alle Turmhauben passen auf die Grundplatte, und die Geschützrohre aus meinem Shop sind für alle Turmhauben identisch.
Die Schußkästen mit Rohren gibt es auch in meinem Shop. Diese sind mit Munitionsrutsche und Verschlüssen gezeichnet.
https://www.shapeways.com/product/KPMK54DQK
Die Grundplatte mit Wiege gibt es auch in meinem Shop.
https://www.shapeways.com/product/6E5XDP26R
Auch die Barbetten gibt es inclusive Zahnkranz in den 2 Höhen für die Türme in meinem Shop.
niedrig
https://www.shapeways.com/product/8WGK6AJQ8
hoch
https://www.shapeways.com/product/8X5QXGXLY
Die Gräting für die Plattform der Turmhaube Bruno ist auch in meinem Shop erhältlich.
https://www.shapeways.com/product/HM5UFLZCF
Die 20 mm C/38 Vierlingsflak ist auch in meinem Shop inclusive Penestralsockel erhältlich.
https://www.shapeways.com/product/DN32FPYBF