White Natural Versatile Plastic
Catalina Capri,TD=16mm, 6" x 1/2" *
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$79.22
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Replacement order is $25 plus shipping.)
You can dye the white nylon a color skin deep. ORANGE for best viewing or BLACK for best UV protection, White is the natural color of nylon.
IMPORTANT: This insert is built for a Track-Depth of 16mm (5/8") and the feed slot cut is 6" x 1/2".
Nipple DRILLING INSTALLATION:
The insert sleeve is symmetrical, with two protruding nipple pins.
Insert a #55 drill bit (or a finishing nail of the same diameter) into each nipple's drill guide hole before centering the insert into the feed slot.
Lightly hammer the drill bit to make a mark into the aluminum back web.
Remove the insert to center punch the drilling locations. First, use 1/8" drill bits, then finish drilling holes with a 3/16" drill bit. Hand twist a larger drill bit in the holes to remove burrs.
Nipple pins of the nylon insert will key into the holes to prevent unintentional sliding of the insert.
REMOVAL:
Top & Bottom ends of the insert sleeve have outer edge notches. Squeezing notches together with needle-nose of hemostat plyers makes it easy to pull the insert up & out.
Reviewed on StingySailor: https://stingysailor.com/2018/03/03/product-review-mastgates-sail-track-gates-2/
Please Register your purchase at Info@MastGates.com for a free Two Year Warranty replacement.
Your name, email, City & State, the item you ordered, yr-make-model of the sailboat.
For free 2-year warranty and support, please register your purchase:
Name, phone number, and email, the part number ordered, sailboat's year, make & model to:
Tom Luque at info@MastGates.com
version PG464B
You can dye the white nylon a color skin deep. ORANGE for best viewing or BLACK for best UV protection, White is the natural color of nylon.
IMPORTANT: This insert is built for a Track-Depth of 16mm (5/8") and the feed slot cut is 6" x 1/2".
Nipple DRILLING INSTALLATION:
The insert sleeve is symmetrical, with two protruding nipple pins.
Insert a #55 drill bit (or a finishing nail of the same diameter) into each nipple's drill guide hole before centering the insert into the feed slot.
Lightly hammer the drill bit to make a mark into the aluminum back web.
Remove the insert to center punch the drilling locations. First, use 1/8" drill bits, then finish drilling holes with a 3/16" drill bit. Hand twist a larger drill bit in the holes to remove burrs.
Nipple pins of the nylon insert will key into the holes to prevent unintentional sliding of the insert.
REMOVAL:
Top & Bottom ends of the insert sleeve have outer edge notches. Squeezing notches together with needle-nose of hemostat plyers makes it easy to pull the insert up & out.
Reviewed on StingySailor: https://stingysailor.com/2018/03/03/product-review-mastgates-sail-track-gates-2/
Please Register your purchase at Info@MastGates.com for a free Two Year Warranty replacement.
Your name, email, City & State, the item you ordered, yr-make-model of the sailboat.
For free 2-year warranty and support, please register your purchase:
Name, phone number, and email, the part number ordered, sailboat's year, make & model to:
Tom Luque at info@MastGates.com
version PG464B
Details
What's in the box:
Catalina Capri 16.5-TD=16mm PG464B
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$60.88
$32.00
$43.66