You must be logged in and verified to contact the designer.
Product Description
- Eyelids - Jaw movement - Bottom Lip - Head rotation - Neck Tilt 2DOF - Shoulder 2DOF each - Elbows - Legs w/Passive Knee's + PLUS "five extra servo placements" for smile, tongue or eyebrows actuators
The mechanical HEAD rig will allow for "up to" 11x HS65MG/HB servos to be installed, however only 6 will be required for full control.
FUTURE PROOF:
Additional spaces have been designed into the mech to allow for expansion 'should you wish to apply other features to the rig. The mechanical BODY will allow for 5x HS***MG/HB Servos to be installed. We would recommend that you use a HS645MG servo for the neck however lower spec servos can be used for the shoulders and legs. (HS485HB - HS311HB)
Also you will require 4x HS65MG/HB servos that fit into the arm to provide Shoulder and Elbow actuation. There are standoffs measuring at 47mm apart that is designed to hold an Arduino NANO Shield.
Required parts:
1x HS645MG Servo
10x HS65MG Servo's
4x HS311HB Servo's
-2mm Threaded Rod
-1mm Steel rod
-M2 Threaded ball joints
-M3 Bolts, washers and nuts.
- 4x 3x4x8mm Flanged bearings
For additional safety 'Springs can replace the Threaded rods in some joints to help ease motor strain and allow for better handling.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: