Clear Ultra Fine Detail Plastic
1/700 RN WW2 Quad 21" Torpedo Tubes x2
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$13.20
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Highly detailed 1/700 RN WW2 Quad 21" Torpedo Tubes (Port and Starboard). Ideal for 1/700 Royal Navy Cruisers and Destroyers.
Model is optimised for easy removal from base and supports can be be kept in place for airbrushing. Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. Customers report that "Bestine" and "Goo Gone" also work well.During the printing process, liquid resin is cured by ultraviolet light.
Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to minimise the risk of damage to parts.
Please take a look at my other items.
- Highly detailed and accurate
- Contains 2 quad tubes, 1 starboard and 1 port
Model is optimised for easy removal from base and supports can be be kept in place for airbrushing. Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. Customers report that "Bestine" and "Goo Gone" also work well.During the printing process, liquid resin is cured by ultraviolet light.
Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to minimise the risk of damage to parts.
Please take a look at my other items.
Details
What's in the box:
700 RN Quad Torp Tubes.stl
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
