The recommended material
FD3S RX-7 Full Depth Cupholder for LHD
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$57.07
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is for a 3rd generation rx7 (FD3S). Left Hand Drive only. This is the deepest cupholder you can put in the ashtray area, and is stabilized by a screw.
You must remove the ashtray and the bottom of the ashtray socket from the centre switch panel (the big middle panel).
Then you have to remove the sheet metal screw that holds the plastic centre console frame to the transmission tunnel.
Then put the switch panel back on, and re-install the sheet metal screw theough the slot in the cupholder.
This gives maximum cup depth.
I recommend the Professional Plastic material, as it is extremely tough. I enabled the Natural Plastic material so that you can save some money if you want.
You must remove the ashtray and the bottom of the ashtray socket from the centre switch panel (the big middle panel).
Then you have to remove the sheet metal screw that holds the plastic centre console frame to the transmission tunnel.
Then put the switch panel back on, and re-install the sheet metal screw theough the slot in the cupholder.
This gives maximum cup depth.
I recommend the Professional Plastic material, as it is extremely tough. I enabled the Natural Plastic material so that you can save some money if you want.
Details
What's in the box:
Cupholdergen4-all-dec29
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
