Brass version; carefully cut sprues between body and footplate.
Nn3 Free-lance 4 Wheel Industrial "Critter"
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$62.10
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Free-lance four-wheel industrial internal combustion locomotive designed to fit a Republic Locomotive Works No. 2199 or Showcase Miniatures SKU: 0018 four-wheel power chassis (not included). Consists of two parts: footplate and body. The footplate is designed to fit snuggly over the power chassis and the body is held in place with two 00-90 screws through MTL 905 couplers and holes in the footplate. It is suggested the builder fabricate and install metal weights inside the body as shown in the instructions diagram to improve traction.
GENERAL NOTE: These craftsman kits consisting of 3D printed resin plastic parts are NOT as strong or flexible as the “engineering” plastics many of you will be used to in railway models, nor even as strong as conventional injection molded styrene. HANDLE THE PARTS CAREFULLY TO AVOID BREAKAGE. Wash the parts in isopropyl alcohol aided by a soft brush. Very thin parts of the kit can be strengthened by applying very small droplets of CA adhesive with the tip of a pin or needle to the back of the thin area after the parts dry.
RLW 2199 Power Chassis: https://www.republiclocomotiveworks.com/show_item.php?ID=490
Showcase 019 Power Chassis: https://www.showcaseminiatures.net/nn3_scale/0018.html
C02-210316
GENERAL NOTE: These craftsman kits consisting of 3D printed resin plastic parts are NOT as strong or flexible as the “engineering” plastics many of you will be used to in railway models, nor even as strong as conventional injection molded styrene. HANDLE THE PARTS CAREFULLY TO AVOID BREAKAGE. Wash the parts in isopropyl alcohol aided by a soft brush. Very thin parts of the kit can be strengthened by applying very small droplets of CA adhesive with the tip of a pin or needle to the back of the thin area after the parts dry.
RLW 2199 Power Chassis: https://www.republiclocomotiveworks.com/show_item.php?ID=490
Showcase 019 Power Chassis: https://www.showcaseminiatures.net/nn3_scale/0018.html
C02-210316
Details
What's in the box:
C02-210316
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
