Orange Processed Versatile Plastic
ITTP holder
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$89.27
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This stylish sheath lets you protect your Hallmark ITTP probe while still keeping it inside your full mill enclosure.
Designed to mount up and to the right of the inside of the enclosure (some drilling needed,) it will shield your probe from the worst of chips and coolant.
The holder is intended to be mounted with a short M6 or 1/4" bolt through the hole in the top back; there are two additional holes at the bottom for M3 / 1/8" bolts if you want for stability, but mine is stable with just the single bolt and some thread locker.
Designed to mount up and to the right of the inside of the enclosure (some drilling needed,) it will shield your probe from the worst of chips and coolant.
The holder is intended to be mounted with a short M6 or 1/4" bolt through the hole in the top back; there are two additional holes at the bottom for M3 / 1/8" bolts if you want for stability, but mine is stable with just the single bolt and some thread locker.
Details
What's in the box:
hallmark-ittp-holder-v2
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
