Cable Guide Cannondale Slate CAAD12 Synapse Alloy

This is a bottom bracket cable guide for routing the brake line and rear derailleur Di2 cable (Di2 only, not for cable actuated front derailleurs) through the bottom bracket. If you run a front Di2 derailleur on a Slate, you will have to make provision for the wire to exit the frame as there is no provision for this included in this part. The CAAD12 already has a port in the seat tube for the Di2 cable to exit.

Closes the hole in the bottom of the bottom bracket and keeps the brake line and rear Di2 cable out of the way of the crank spindle. It is applicable to Cannondale bikes that are originally equipped with the KP412 or K32108 cable guide.  This includes the Slate, CAAD12, and Synapse Alloy.

This piece requires you you supply an M4x12mm flat head bolt and M4 nut (available at the local hardware store).  The nut is held captive in the recess in the upper component of the cable guide.