I offer here the lat grate for the flak platform of the 380 mm gun turret Bruno for the battleships Bismarck and Tirpitz in 1/100 scale. The lat grate fits only on the platform of the 380 mm turret hood Bruno from my store. These parts were made after construction drawings and original pictures.
The lat grate has 2 pins at the bottom which are simply put into 2 holes of the platform on the turret cover. To the lat grate belong 4 ready ammunition cabinets for the 20 mm C/38 quadruple flak.
This set is only needed if the 20 mm C/38 is also mounted on the platform.
In my store there is also the turret hood for turret Bruno with flak platform
https://www.shapeways.com/product/WCS3F6TWL
as well as the turret hoods for Caesar and Dora.
https://www.shapeways.com/product/K9G4P4CCL
There is also the version without rangefinder for Turm Anton.
https://www.shapeways.com/product/DWZ3TTC4K
The shotboxes with tubes are also available in my store. These are drawn with ammunition chute and latches.
https://www.shapeways.com/product/KPMK54DQK
All turret hoods fit on the base plate, and the gun tubes from my store are identical for all turret hoods.
The baseplate with cradle is also available in my store.
https://www.shapeways.com/product/6E5XDP26R
Also the barbettes are available including gear rim in the 2 heights for the turrets in my store.
low
https://www.shapeways.com/product/8WGK6AJQ8
high
https://www.shapeways.com/product/8X5QXGXLY
The 20 mm C/38 Vierlingsflak is also available in my store including Penestralsockel.
https://www.shapeways.com/product/DN32FPYBF
Ich biete hier die Gräting für die Flakplattform des 380 mm Geschützturms Bruno für die Schlachtschiffe Bismarck und Tirpitz im Maßstab 1/100 an. Die Gräting passt nur auf die Plattform der 380 mm Turmhaube Bruno aus meinem Shop. Diese Teile wurden nach Konstruktionszeichnungen und Orginalbildern erstellt.
Die Gräting hat unten 2 Zapfen die einfach in 2 Löcher der Plattform auf der Turmhaube gesteckt werden. Zu der Gräting gehören noch 4 Bereitschaftsmunitionsschränke für die 20 mm C/38 Vierlingsflak.
Diese Gräting wird nur gebraucht wenn auch auf der Plattform die 20 mm C/38 montiert wird.
In meinem Shop gibt es auch die Turmhaube für Turm Bruno mit Flakplattform
https://www.shapeways.com/product/WCS3F6TWL
sowie die Turmhauben für Cäsar und Dora.
https://www.shapeways.com/product/K9G4P4CCL
Auch gibt es die Version ohne Entfernungsmesser für Turm Anton.
https://www.shapeways.com/product/DWZ3TTC4K
Alle Turmhauben passen auf die Grundplatte, und die Geschützrohre aus meinem Shop sind für alle Turmhauben identisch.
Die Schußkästen mit Rohren gibt es auch in meinem Shop. Diese sind mit Munitionsrutsche und Verschlüssen gezeichnet.
https://www.shapeways.com/product/KPMK54DQK
Die Grundplatte mit Wiege gibt es auch in meinem Shop.
https://www.shapeways.com/product/6E5XDP26R
Auch die Barbetten gibt es inclusive Zahnkranz in den 2 Höhen für die Türme in meinem Shop.
niedrig
https://www.shapeways.com/product/8WGK6AJQ8
hoch
https://www.shapeways.com/product/8X5QXGXLY
Die 20 mm C/38 Vierlingsflak ist auch in meinem Shop inclusive Penestralsockel erhältlich.
https://www.shapeways.com/product/DN32FPYBF