Smooth Fine Detail Plastic
1" Lightsaber blade plug
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$23.47
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
The is a 1" OD blade plug base for those DIY people out there. This will allow you to make your own turbine style blade plug for your lightsaber.
This will fit the round electric razor blade covers and the center cone part can be added as well, many options can be found at most retail stores or amazon, to give the look on a turbine blade that you want. To add the center cone of your choice you will need to drill a whole down the center of the plug. (size of drill bit depends on the screw you plan to use)
The bottom/emitter side is hollow and will fit a thick walled pixel blade adaptor and blade side pcb. (various saber masters offer both). For those that have in hilt LEDs no extras are needed.
The outer pipe, brass shown in pictures, can be whatever material of your choice and should be cut to what you need. Pipe needs to be 1 inch (25.5 mm max) outer diameter and .86 inch(22mm or larger) inner diameter.
Remember to test fit all items before glueing as some sanding may be required due to the printing process.
This will fit the round electric razor blade covers and the center cone part can be added as well, many options can be found at most retail stores or amazon, to give the look on a turbine blade that you want. To add the center cone of your choice you will need to drill a whole down the center of the plug. (size of drill bit depends on the screw you plan to use)
The bottom/emitter side is hollow and will fit a thick walled pixel blade adaptor and blade side pcb. (various saber masters offer both). For those that have in hilt LEDs no extras are needed.
The outer pipe, brass shown in pictures, can be whatever material of your choice and should be cut to what you need. Pipe needs to be 1 inch (25.5 mm max) outer diameter and .86 inch(22mm or larger) inner diameter.
Remember to test fit all items before glueing as some sanding may be required due to the printing process.
Details
What's in the box:
Housing
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
