Tan Fine Detail Plastic
1/600 Scale British Sherman Firefly Tank x12
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$16.87
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Highly detailed 1/600 scale British Sherman Firefly Tank Set (12)
The Sherman Firefly was a tank used by United Kingdom and some Commonwealth and Allied armoured formations in the Second World War. It was based on the US M4 Sherman but fitted with the powerful 3-inch (76.2 mm) calibre British 17-pounder anti-tank gun as its main weapon. Originally conceived as a stopgap until future British tank designs came into service, the Sherman Firefly became the most common vehicle mounting the 17-pounder in the war.
Though the British expected to have their own new tank models developed soon, British Major George Brighty championed the already rejected idea of mounting the 17-pounder in the existing Sherman. With the help of Lieutenant Colonel Witheridge, and despite official disapproval, he managed to get the concept accepted. This proved fortunate, as both the Challenger and Cromwell tank designs experienced difficulties and delays.
After the difficult problem of getting the gun to fit in the Sherman's turret was solved by W.G.K. Kilbourn, a Vickers engineer, the Firefly was put into production in early 1944, in time to equip Field Marshal Montgomery's 21st Army Group for the Normandy landings. It soon became highly valued as one of the only British tanks capable of defeating at long range the Panther and Tiger tanks it faced in Normandy. In recognition of this, German tank and anti-tank gun crews were instructed to attack Fireflies first. Between 2,100 and 2,200 were manufactured before production wound down in 1945.
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. Customers report that "Bestine" and "Goo Gone" also work well.During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
The Sherman Firefly was a tank used by United Kingdom and some Commonwealth and Allied armoured formations in the Second World War. It was based on the US M4 Sherman but fitted with the powerful 3-inch (76.2 mm) calibre British 17-pounder anti-tank gun as its main weapon. Originally conceived as a stopgap until future British tank designs came into service, the Sherman Firefly became the most common vehicle mounting the 17-pounder in the war.
Though the British expected to have their own new tank models developed soon, British Major George Brighty championed the already rejected idea of mounting the 17-pounder in the existing Sherman. With the help of Lieutenant Colonel Witheridge, and despite official disapproval, he managed to get the concept accepted. This proved fortunate, as both the Challenger and Cromwell tank designs experienced difficulties and delays.
After the difficult problem of getting the gun to fit in the Sherman's turret was solved by W.G.K. Kilbourn, a Vickers engineer, the Firefly was put into production in early 1944, in time to equip Field Marshal Montgomery's 21st Army Group for the Normandy landings. It soon became highly valued as one of the only British tanks capable of defeating at long range the Panther and Tiger tanks it faced in Normandy. In recognition of this, German tank and anti-tank gun crews were instructed to attack Fireflies first. Between 2,100 and 2,200 were manufactured before production wound down in 1945.
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. Customers report that "Bestine" and "Goo Gone" also work well.During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Details
What's in the box:
600 Sherman Firefly X12.stl
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
