White Processed Versatile Plastic
AS2001-01 Axial SCX10 II Battery & Winch Bulkhead
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$43.40
Basic Materials Best Value
Shop Owner Recommendations
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This mount will allow you to install a servo winch next to the steering servo on the Axial SCX10 II chassis. This was prototyped on the '55 F100 body version so if there are differences, please note this. The servo winch for standard ride height trucks needs to be spaced up 7-10mm depending on your winch spool thickness. The spool side of the servo is facing the rear of the truck. For raised applications, the servo can be screwed down to the bulkhead directly. All holes need to be cleaned out with a 2.5mm drill bit and tapped with an M3 tap if using the stock screws for the Axial. Do not over-torque the screws. See the video below prior to purchase.
Details
What's in the box:
as2001-01_batt_winch
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
