E-Revo Double Bracing Mount (Front)
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$10.48
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
E-REVO Double Bracing Mount (Front)
#URC0112FR
Are you tired of breaking chassis and bulkheads on your Traxxas E-REVO?
Then this upgrade is made just for you !!!
Eliminate chassis flexure with this simple upgrade by creating an overall more rigid frame.
Product Description
#URC0112FR
Are you tired of breaking chassis and bulkheads on your Traxxas E-REVO?
Then this upgrade is made just for you !!!
Eliminate chassis flexure with this simple upgrade by creating an overall more rigid frame.
Product Description
It is well known that the Traxxas E-REVO chassis experience a lot of flexure due to its plastic construction. This is particularly evident at both ends of the chassis (front & rear) where the bulkheads are fixed onto the chassis. The reason for this is that the stiffness provided by the chassis at these two weak points is almost negligible. Therefore most of the resistance to flexure is provided by the bulkheads and their fixity onto the chassis.
Having this in mind and closely examining an E-REVO bulkhead you can easily identify its weakest point, which is at the end opposite the differential housing. As you can see, the weak point on the chassis is located closely to the weak point of the bulkheads therefore imagine if we superimpose these two weak points...the result is the weakest point on the E-REVO chassis.
You can easily strengthen these weak points on the front and rear of the truck by using the Double Bracing Mounts. You will never break a bulkhead again.
Only the front mount is included in the package, the rear mount, pushrods and screws need to be bought separately. For more information please see below.
Screws Required:
2x M3x16mm & 2x 3mm nuts
2x M3x18mm
2x M3x40mm
Parts Required:
2x Traxxas SLAYER stock pushrods (#TRX5918)
Product Information:
Dimensions: 4.4 x 2.0 x 1.9cm
Item weight: 100g (approximate)
Product Number: URC0112FR
NOTE: For the front mount you need to drill two holes on the body post tower. You should place the Front Double Bracing Mount onto the body post tower and use it as guidance when drilling the holes.
Visit the main Product Page
Having this in mind and closely examining an E-REVO bulkhead you can easily identify its weakest point, which is at the end opposite the differential housing. As you can see, the weak point on the chassis is located closely to the weak point of the bulkheads therefore imagine if we superimpose these two weak points...the result is the weakest point on the E-REVO chassis.
You can easily strengthen these weak points on the front and rear of the truck by using the Double Bracing Mounts. You will never break a bulkhead again.
Only the front mount is included in the package, the rear mount, pushrods and screws need to be bought separately. For more information please see below.
Screws Required:
2x M3x16mm & 2x 3mm nuts
2x M3x18mm
2x M3x40mm
Parts Required:
2x Traxxas SLAYER stock pushrods (#TRX5918)
Product Information:
Dimensions: 4.4 x 2.0 x 1.9cm
Item weight: 100g (approximate)
Product Number: URC0112FR
NOTE: For the front mount you need to drill two holes on the body post tower. You should place the Front Double Bracing Mount onto the body post tower and use it as guidance when drilling the holes.
Visit the main Product Page
Details
What's in the box:
E-REVO Double Bracing Mount (Front)
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$7.23
$17.06
$10.00
