White Natural Versatile Plastic
Carrera Universal 132 Porsche 962 C KH LH
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$12.29
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This support for Carrera Universal 132 fits to the chassis of Slot.it Porsche 962, for old and new version. For example CA34a and all other which are identical in construction. Doesnt matter if 962C, 962KH, 962LH, 962IMSA or 962/85.
1. Cut the area below the front axle
2. Use a axle between support (for correct position of support) and chassis.
3. Make a smooth cut at the bottom of the chassis for a nice look.
4. Glue support to chassis (1st glueing!). First glueing action is only to fix the support in the correct position.
5. Demount axle, when first glueing is finished. Use for example JB Weld steel/epoxy for the 2nd glueing.
6. Mount the Carrera Universal guide fin the the guide fin support and mount it to the support, which is already glued to the chassis. Place the guide fin as close as possible to the front axle. There is not much space under the body of this Porsche.
7. Cockpit has to be modyfied as shown in the pictures. For use a Bühler or Johnson 20543 motor use the printed cockpit (not included!)
KIT (Support+Cockpit) is available here:
https://www.shapeways.com/product/7LSRVLEFN/carrera-universal-132-porsche-962-c-kh-lh-kit?optionId=65281235&li=shop-inventory
Cockpit is as single part available here:
https://www.shapeways.com/product/PEX2LADED/slot-it-cockpit-porsche-962-956-c-kh-lh?optionId=65281271&li=shop-inventory
1. Cut the area below the front axle
2. Use a axle between support (for correct position of support) and chassis.
3. Make a smooth cut at the bottom of the chassis for a nice look.
4. Glue support to chassis (1st glueing!). First glueing action is only to fix the support in the correct position.
5. Demount axle, when first glueing is finished. Use for example JB Weld steel/epoxy for the 2nd glueing.
6. Mount the Carrera Universal guide fin the the guide fin support and mount it to the support, which is already glued to the chassis. Place the guide fin as close as possible to the front axle. There is not much space under the body of this Porsche.
7. Cockpit has to be modyfied as shown in the pictures. For use a Bühler or Johnson 20543 motor use the printed cockpit (not included!)
KIT (Support+Cockpit) is available here:
https://www.shapeways.com/product/7LSRVLEFN/carrera-universal-132-porsche-962-c-kh-lh-kit?optionId=65281235&li=shop-inventory
Cockpit is as single part available here:
https://www.shapeways.com/product/PEX2LADED/slot-it-cockpit-porsche-962-956-c-kh-lh?optionId=65281271&li=shop-inventory
Details
What's in the box:
Slot.it_P962_Umbau_Universal_einzeln
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
