RSD TC7.1 Suspension Mount Inserts

Thse suspension mount are designed to be used without pivot balls.  The Main benefit is the ability to use a "4 dot" pill in order to make the car wider or narrower than stock.  Additionaly the pivot less inserts don't develop slop as quickly as the original units.  

Please note:
1.The process for 3d printing this part is SLS, which uses a laser to "melt" plastic together. Sometimes there is a little bit of powder left in the holes for the hinge pin.  It can be a good idea to use a 3mm drill bit to "clean up"  2.The parts are made to have a tight fit.  In order to free up, once installed, it is good practice to tap the A-Arms with the handle of a screw driver firmly a couple of times to free up.  Also, you must keep in mind that the hinge pin must now provide the pivot of the arm, so if this is not smooth, it can create s little bit of bind like on the XRAY cars.  It is a good idea to use a 3mm reamer on the A Arm to ensure the movement is very free.