KR SID Chassis METAL Part 2

Made by

ShtokCustomWorx

Print With Shapeways

Choose Your Material

$152.11

+more

Silver
Starting at $ 265.43

Gold Plated Brass
Starting at $ 203.14

Rhodium Plated Brass
Starting at $ 238.99

Brass
Starting at $ 152.11

Bronze
Starting at $ 152.11

Copper
Starting at $ 179.99

Choose your color and finish

Have a question about this product?

contact the designer

You must be logged in and verified to contact the designer.

Product Description

Chassis body metal shell
for "KR / OR Emperor" Sidious saber (2020)

Please read this Assembly Manual before assembling:
>>> PDF Assembly Instructions <<<

Features:

with a nice detailed full metal Crystal Chamber
for Pixelblade/Neopixel setup with a SCW NPXL™ V3 connector pcb
full size removable 18650 Protected Li-Ion battery
USB-C port support (for SD card Data access, firmware uploads)
high power Kill Switch support
BT909 bluetooth module support
Proffieboard, GHv3 sound boards support
22mm KRsabers detachable Speaker
Pixel accent strips
red and green buttons backlight leds

Metal chassis shell part.

For this chassis assembly you also need:

x1 NPXL V3 blade pogo pin connector from ShtokCustomWorx (with LONG pins) for Pixelblade/Neopixel setup: NPXL Connector (USA) / NPXL Connector (UK)
x1 special transparent lid part for NPXL V3 connector Hilt side pcb: transparent lid part for NPXL V3 connector Hilt side pcb and 3D-printed chassis
x1 Positive and x1 Negative Battery contact terminals
x2 momentary tactile switches with brass buttons (1.6mm type): brass tactile switch
x1 Kill Switch: High Power Kill Switch
x2 4mm OD 95mm long brass/aluminum/copper tubes
x2 1mm OD 11mm long brass/aluminum/copper rods for the crystal chamber fins accent details
x1 1.5mm OD 69.5mm long brass/aluminum/copper rod for the chassis sound board hatch
x2 M3*3mm (or similar inch size) DIN 913 set screws to attach speaker holder section to the main chassis section
x9 M2*3mm (or similar inch size) DIN 913 set screws to attach metal and plastic speaker holder parts (x4), main metal chassis part to the inner plastic part (x2) and assemble emitter/blade connector holder parts (x3)
x2 M1.6*5mm (or similar inch size) DIN 965 screws to attach crystal chamber section part to the main chassis metal shell part
x1 M4*6-8mm DIN 7991 screw to attach speaker holder to the saber pommel
x1 5mm LED or x2 pixel segment cut off the 3535 or 2020 strip (for crystal chamber)
2*5*7mm rectangle leds (x1 red and x1 green) for buttons backlight
WS2812C-2020 neopixel strip segments of x2 10 pixels and x2 11 pixels (150 leds/0.5m) for side accent pixels
sound board, 22mm speaker, speaker connector pcb "SPKR Type 2", BT909 bluetooth module, USB-C port, 18650 high drain 10A or 15A Protected battery