Gray PA12
M38 - rear inner fender (GF-03)
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$33.87
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Project Wild Willy: this item has been designed to fill the void between the rear of the Wild Willy 2 body and the chassis - specifically the 4x4 GF-03 conversion that can accomodate magnets to hold the floor (sold seperately) in place. It is held in place using three existing screws (one under the NOS bottle, one under the drivers seat and one in the tailgate. It includes support for the antenna thus keeping it with the body rather than fixed to the chassis which gets relocated with the GF-03 conversion (meaning that the antenna mount on the right hand chassis rail must be cut off).
No cutting or gluing is required - just painting, typically sprayed with the same colour or a darker shade as the body or can be left black if ordered that way. Not compatible with the original 1980's chassis.
The development of this item and associated parts can be found here:
NicheRotors :: Original Wild Willy Custom Parts - Page 7 - TC Designs... - Tamiyaclub.com
No cutting or gluing is required - just painting, typically sprayed with the same colour or a darker shade as the body or can be left black if ordered that way. Not compatible with the original 1980's chassis.
The development of this item and associated parts can be found here:
NicheRotors :: Original Wild Willy Custom Parts - Page 7 - TC Designs... - Tamiyaclub.com
Details
What's in the box:
M38 - GF-03 rear inner fender
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$7.42
$5.00
