Click and drag to rotate
BTR-60 PA (closed) 3d printed

DIGITAL PREVIEW
Not a Photo

Tan Fine Detail Plastic
BTR-60 PA (closed) 3d printed parts in smoothest fin detail plastic
BTR-60 PA (closed) 3d printed parts in smoothest fin detail plastic

DIGITAL PREVIEW
Not a Photo

BTR-60 PA (closed) 3d printed
BTR-60 PA (closed) 3d printed

DIGITAL PREVIEW
Not a Photo

BTR-60 PA (closed)

Made by
Print With Shapeways
Choose Your Size
$36.37
Choose Your Material
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
The BTR-60PA is a soviet built armored personnel carrier which was produced from 1963 until 1965.
This model represents a BTR-60PA of the 1960s with closed hatches. The wheels of the model are turning.

Note: the wheels might not turn when you receive the model due to remaining wax from the printing process

For cleaning place the parts for a couple of minutes in a solution of hot water (approx. 70-75°C) and dish soap. Carefully clean the parts with a soft brush to remove remaining wax. If necessary repeat the cleaning until you can turn the wheels. If necessary adjust parts for fitting. Assemble the model. Paint the model.

------------------------------------------------------------------------------------------

Der BTR-60PA ist ein sowjetischer Schützenpanzerwagen, der in der Sowjetunion von 1963 bis 1965 produziert wurde.
Das Modell stellt einen typischen BTR-60PA / SPW-60PA der 1960er Jahre dar wie er auch in der DDR zum Einsatz kam. Die Räder des Modells sind beweglich.

Achtung: Ggf. sind die Räder nicht drehbar, wenn Sie das Modell erhalten. Dies liegt an Wachsresten vom Drucken.

Zum Reinigen tauchen Sie die Teile in eine Lösung aus heißem Wasser (ca. 70-75°C) und Spülmittel und entfernen Sie Wachsreste mit Hilfe eines Pinsels. Wiederholen Sie ggf. die Reinigung bis sich die Räder drehen lassen. Passen Sie ggf. die Teile für die Montage an. Montieren Sie das Modell. Lackieren Sie das Modell.
Details
What's in the box:
BTR-60PA_closed_SW_120
Dimensions:
2.35 x 6.22 x 2.16 cm
Switch to inches
0.93 x 2.45 x 0.85 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.