These sliders will protect the bottom of the body and help slide over rocks a lot easier. Designed with a smooth bottom so there's minimal catch points.
-To Install-- Remove inner 2 screws on one side of center skid plate
- Remove outer 2 screws on one side of center skid plate
- If you're careful with the rig the links won't move but if they do you'll need to move them back into position
- Loosely secure slider to chassis using front or rear link mount screws
- Next install center 2 screws snug
- Snug up front and rear screws
-Material Options-
Versatile Plastic and Multijet Fusion are very similar base materials, both Nylon. Versatile plastic is all printed white and then dyed the chosen color. MultiJet Fusion is the chosen color all the way through. MultiJet is limited to 2 colors but also has glass bead options.
-Notes -
The stock body hangs a little lower than the screw holes so these actually slope down and you put the screws on the top side of the sliders. If you've trimmed the body or are using a shorter body, just swap sides for a slope up. The stock screws are jusssst long enough to use but if you can find some +1 or +2 mm it wouldn't hurt.