Golem Shrimp NERD Mount - Right Side
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$34.51
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Please read the following description fully and carefully so you know what you are getting.
This is a low-profile mount for the Shearwater NERD and NERD2 to be mounted to a Golem Gear Shrimp Bail Out Valve. This new design re-uses the hardware from the original Shearwater mount, so no additional hardware is needed to purchase. Parts reused are shown in the above image, and include the shoulder screw, pivot nut, one of the 8-32 hex-drive screws and nut.
This mount is intended to be mounted to the right side of the BOV. It has a 4 degree clockwise rotation between the NERD and the barrel of the BOV. This is for easier alignment to your eye. Fine tuning alignment may be accomplished by sliding the bracket on the hose nut left or right on the x-axis, or rotating the clamp around the hose nut.
The above images are computer generated renderings on an accurate CAD model of the BOV.
This is 3d printed printed out of PA12 plastic, and is very robust under normal diving conditions. I am a rebreather instructor and my own personal NERD mount has been in use on my KISS rebreather since 2018 and has over 1500 hours of use and sunlight exposure.
Any questions, please ask. Product you are ordering is for the NERD mount only and does not include the hardware. If you no longer have your original NERD mount hardware from Shearwater, I have other designs that use alternative nuts and bolts, please message me.
- This mount does not include any mounting hardware.
- You must re-use the mounting hardware that came with your original Shearwater NERD clamp.
- This mount is for the right side of the BOV only.
- Shapeways is a 3rd party company who makes these. I do not make them. Shapeways does not offer refunds on 3d printed products ordered in error.
This is a low-profile mount for the Shearwater NERD and NERD2 to be mounted to a Golem Gear Shrimp Bail Out Valve. This new design re-uses the hardware from the original Shearwater mount, so no additional hardware is needed to purchase. Parts reused are shown in the above image, and include the shoulder screw, pivot nut, one of the 8-32 hex-drive screws and nut.
This mount is intended to be mounted to the right side of the BOV. It has a 4 degree clockwise rotation between the NERD and the barrel of the BOV. This is for easier alignment to your eye. Fine tuning alignment may be accomplished by sliding the bracket on the hose nut left or right on the x-axis, or rotating the clamp around the hose nut.
The above images are computer generated renderings on an accurate CAD model of the BOV.
This is 3d printed printed out of PA12 plastic, and is very robust under normal diving conditions. I am a rebreather instructor and my own personal NERD mount has been in use on my KISS rebreather since 2018 and has over 1500 hours of use and sunlight exposure.
Any questions, please ask. Product you are ordering is for the NERD mount only and does not include the hardware. If you no longer have your original NERD mount hardware from Shearwater, I have other designs that use alternative nuts and bolts, please message me.
Request a custom order
and get this product personalized just for you
Details
What's in the box:
Golem R4
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
