1/144 German VK 30.01 (P) Medium Tank
1/144 German VK 30.01 (P) Medium Tank
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$37.27
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1/144 Scale WW2 German VK 30.01 (P) Medium Tank.
Highly detailed tank set with accurate Track detail and moveable Turret
Contains:
German VK 30.01 (P) Medium TankIn 1937, along with Henschel, Porsche was given the task of build the medium tank that would replace Panzerkampfwagen IV. Its design was supposed to be capable of being armed with 75mm L/24 or even if possible 105mm L/28 gun and one 7.92mm MG34 for local defence. VK3001(P) was Porsche's first design since 1927's Grosstraktor I and its drawings were finished by September 5th of 1939 by Porsche's Chief Engineer Karl Rabe.
Prototypes were supposed to be fitted with turrets manufactured by Krupp. Porsche considered arming the vehicle with 105mm KwK L/47, 105mm KwK L/52 gun and finally with 88mm KwK 36 L/56 gun (developed from 88mm Flak 36 gun). Six turrets armed with 88mm guns were ordered in April of 1941, but none were produced. Leopard's turret was similar in appearance to that used on Tiger(P) and Tiger. Porsche planned to power VK3001(P) with gasoline-electric power/drive system (two air-cooled Porsche Typ 100 engines by Steyr and electric transmission). Only one or two turretless prototypes were completed by Nibelungenwerke in St.Valentin, Austria in late (October) 1941, out of 3 hulls originally ordered. Although many problems were encountered with its advanced power and drive system, prototype(s) performed well. During tests prototype(s) reached maximum speed of 60km/h but its fuel consumption was 170 liters per 100 kilometers. In order to solve the engine problems, Porsche designed diesel engine (Porsche Typ 200) but it was never produced.
VK3001(P) program was abandoned and two prototypes were used extensively in the development of VK4501(P) - Porsche's Tiger, which started in July of 1941. In order to transport VK3001(P) tank, Porsche designed special tank transporter (Panzertransporter Porsche 142), but this project was also abandoned. Tests continued until May of 1942, but VK3001(P) never went into production just like VK3001(H) and VK3601(H).
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. Customers report that "Bestine" and "Goo Gone" also work well.During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Highly detailed tank set with accurate Track detail and moveable Turret
Contains:
- 1x German VK 30.01 (P) Medium Tank
German VK 30.01 (P) Medium TankIn 1937, along with Henschel, Porsche was given the task of build the medium tank that would replace Panzerkampfwagen IV. Its design was supposed to be capable of being armed with 75mm L/24 or even if possible 105mm L/28 gun and one 7.92mm MG34 for local defence. VK3001(P) was Porsche's first design since 1927's Grosstraktor I and its drawings were finished by September 5th of 1939 by Porsche's Chief Engineer Karl Rabe.
Prototypes were supposed to be fitted with turrets manufactured by Krupp. Porsche considered arming the vehicle with 105mm KwK L/47, 105mm KwK L/52 gun and finally with 88mm KwK 36 L/56 gun (developed from 88mm Flak 36 gun). Six turrets armed with 88mm guns were ordered in April of 1941, but none were produced. Leopard's turret was similar in appearance to that used on Tiger(P) and Tiger. Porsche planned to power VK3001(P) with gasoline-electric power/drive system (two air-cooled Porsche Typ 100 engines by Steyr and electric transmission). Only one or two turretless prototypes were completed by Nibelungenwerke in St.Valentin, Austria in late (October) 1941, out of 3 hulls originally ordered. Although many problems were encountered with its advanced power and drive system, prototype(s) performed well. During tests prototype(s) reached maximum speed of 60km/h but its fuel consumption was 170 liters per 100 kilometers. In order to solve the engine problems, Porsche designed diesel engine (Porsche Typ 200) but it was never produced.
VK3001(P) program was abandoned and two prototypes were used extensively in the development of VK4501(P) - Porsche's Tiger, which started in July of 1941. In order to transport VK3001(P) tank, Porsche designed special tank transporter (Panzertransporter Porsche 142), but this project was also abandoned. Tests continued until May of 1942, but VK3001(P) never went into production just like VK3001(H) and VK3601(H).
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. Customers report that "Bestine" and "Goo Gone" also work well.During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Details
What's in the box:
144 VK 30.01 (P).stl
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
